Polymeric Dispersant DESCRIPTION
Polymer dispersant suitable for dispersing pigments in low polarity coatings.
PRODUCT DATA
| Chemical composition |
highly branched polymer solution |
| Appearance |
Light yellow to brown liquid |
| Acid value (mg KOH/g) |
5-40 |
| Amine value (mg KOH/g) |
5-40 |
| Density g/cm³ (23℃) |
0.80-1.00 |
| Viscosity cps (25℃) |
50-500 |
| Active ingredient (%) |
100 |
The data presented on this data sheet are typical values only and do not constitute technical specifications for the product.
STORAGE and TRANSPORT
Please stir well before use, delamination or turbidity may occur when the temperature is lower than 0℃, it should be heated to 30℃-40℃ and stirred well before use.
APPLICATION GUIDELINES
Ceramic Ink Features and Benefits
Anjeka-6402A can be used in low polarity ceramic inkjet inks with hydrocarbon and fatty acid esters, either as a dispersant alone or in combination with other products. This product also helps to shorten the grinding time and filtration time of ceramic colorant slurry, improve productivity, and prepare ceramic inks with Newtonian fluid properties. It helps to improve the storage stability of the colorants in ceramic inks, reduce sedimentation, and improve the vivid color.
APPLICATION SECTORS
This additive is recommended for dispersing colorants in ceramic inks.
RECOMMENDED LEVELS
Dosage of additives (in purchased form) based on the pigment: 10%-50%.
The optimum dosage should be determined through a series of tests.
INCORPORATION AND PROCESSING INSTRUCTIONS
For best performance, the additive should be added to the abrasive first, mixed well and then added to the colorant.
PACKAGING
- -25kg iron drum with inner coating
- -200kg ring plastic drum
Our service
- Respond to inquiries within 24 hours.
- Superior quality products at competitive prices.
- Strong R&D and technical support.
- Dedicated professional team service.
- Flexible customized production for various packaging options.
- On-time delivery with no delays.
Our team:
Our company
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
Benefits to our customers and partners:
- Stable large-scale production with enhanced quality control
- Lower unit production cost
Collaboration Opportunities:
- Contract manufacturing
- OEM / ODM partnerships
¡Su mensaje debe tener entre 20 y 3.000 caracteres!
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
