Polymeric Dispersing Agent Dispersing Nanoparticles lubrizol 32500 disperant
DESCRIPTION
Anjeka 6040 is a polymeric dispersant suitable for dispersing pigments in solvent-borne coatings.
PRODUCT DATA
Chemical composition:
hyperbranched polyester compound with imide anchoring functional group.
Typical Properties
The values given in this data sheet describe the typical properties and do not constitute specification limits.
| Active matter content: |
40% |
| Acid value: |
1-20 mg KOH/gl |
| Amine value: |
1-10 mg KOH/g |
| Density: |
0.9-1.10g/ml(20℃) |
| Flash point: |
24℃ |
| Color: |
light yellow to brown liquid |
| Solvent: |
n-butyl acetate |
STORAGE AND TRANSPORTATION
Separation and turbidity may occur at temperatures below 0℃. Warm to 30℃ and mix well before use.
ATTENTION
The surface-treatment of some organic pigments may negatively affect the efficiency of the additive. In such cases, tests with the untreated pigment of the same type may be successful.
APPLICATION
Coatings industry and printing inks.
Advantages
- Anjeka 6040 enhances the luster of organic pigments, intensifies colors, provides anti-flocculation properties, and minimizes haze resulting from uneven dispersion.
- Particularly noteworthy is its effectiveness in enhancing the dispersion of surface carbon black, leading to an improved richness of the coating's black color.
- Additionally, this product contributes to decreased grinding time, heightened productivity, and improved storage stability of the coating.
Hyperdispersants have become an important and indispensable additive in the field of coatings, inks and composites due to their efficient dispersing properties, viscosity reduction, stability enhancement and environmental friendliness.
RECOMMENDED USE
- This additive is best utilized for dispersing pigments and inks within solvent-based coatings, providing stabilization for organic pigments, with a specific focus on enhancing the stability of carbon black.
- Its versatility extends to compatibility with various coating resins, including but not limited to polyester resins, polyurethane resins, and acrylic resins.
RECOMMENDED ADDITION LEVEL
The amount of additive (as supplied form) is based on the pigment
| Titanium dioxide or inorganic fillers: |
0.5%-2% |
| High-surface carbon black: |
40%-80% |
| Inorganic pigments: |
4%-8% |
| Organic pigments: |
10%-50% |
| Carbon black |
10%-30% |
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
PROCESSING INSTRUCTIONS
For the best performance, the additive must be added into the millbase before addition of pigments. Do not add the pigments until the additive has been homogeneously and uniformly distributed.
PACKING
- 25KG Iron drum
- 180KG Plastic drum
Our service
- 1. Reply within 24 hours.
- 2. High-quality products and reasonable price
- 3. R&D technology support.
- 4. Professional team service
- 5. Customiszed production for different package
- 6. No delay on shipment
Our team:
Our company:
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
Benefits to our customers and partners:
Stable large-scale production with enhanced quality control
Lower unit production cost
Collaboration Opportunities:
Contract manufacturing
OEM / ODM partnerships
Our Certifcate&Patents
¡Su mensaje debe tener entre 20 y 3.000 caracteres!
