Resaltar:
wetting leveling agent for metal surface treatment Reducing surface tension
DESCRIPTION
Anjeka 7412 is a silicone surfactant for aqueous coatings, printing inks and overprint varnishes with strong reduction of surface tension and significantly improvement substrate wetting.
PRODUCT DATA
Composition: Solution of polyether-modified polydimethylsiloxane.
Tropical properties
The values given in this data sheet describe the typical properties and do not constitute specification limits.
| Active matter content: |
50% |
| Density (23 ℃): |
0.96-1.06 g/ml |
| Solvents: |
PM |
| Flash point: |
74 ℃ |
STORAGE AND TRANSPORTATION
Separation and turbidity may occur at temperatures below 5℃. Warming to 20℃ and mix well before use.
ATTENTION
Anjeka 7412 is stable in coating system of pH 4-10. In order to avoid turbidity, the additive requires a small amount of co-solvent in the formulation (approx. 5% of the total solvent content). The effective of Anjeka 7412 is reduced in systems with high co-solvent amounts. In this case, we recommend Anjeka 7333.
APPLICATION
Industrial Coatings
Characters and advantages
The additive provides a large decrease in surface tension of aqueous systems and therefore improves substrate wetting and leveling in particular. Foam stabilization does not occur or only very minimally, and recoatability is not affected. The additive does not increase surface slip. If higher surface slip is desired, we recommend Anjeka 7333.
RECOMMENDED USE
The additive is recommended for all aqueous coatings, printing inks and overprint varnishes which contain a small proportion of organic co-solvent.
RECOMMENDED ADDITION LEVEL
0.05-0.5% additive (as supplied) based upon total formulation.
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
PROCESSING INSTRUCTIONS
The additive can be incorporated during any stage of the production process. We recommend that the additive is added in the final production stage of coating.
PACKING
25KG iron drum
180KG plastic drum
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3. R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Our team:
Our company:
We are building a new large-scale production base
strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
Benefits to our customers and collaboration partners:
• stable large-scale production, better quality control
• lower production unit cost
Collaboration Opportunities:
• contract manufacturing and OEM/ODM collaboration opportunities
¡Su mensaje debe tener entre 20 y 3.000 caracteres!
